Instructions
Install the 4 liner hooks: Work the squiggly end of each hook around the outer edge of the litter box, the bottom hook end downward into the box. Push the back hooks as far back as the go and pull the front hooks as far forward as possible.
Install the liner: With the open side facing front to match the front-entry opening on the Flip base, position the Modkat TYPE-F Liner conforming it tautly around the interior of the litter box. The top of the liner has a grommet in each corner, which should be hung on each of the previously installed litter box hooks.
Install the lid: Hold the folded lid with the back hinges pointing downward. Align the hinges with their counterparts on the back of the base. Gently push each hinge into place, one-two-three. Swivel the lid down covering the back half and then swivel the front half forward covering the remainder of the box.
Install the logo clip: Hold the clip by the logo front and use the back portion to pull the liner against the inside front of the litter box. Push down to engage over the front lip and center accordingly.
Store the scoop: Locate the protruding tabs on the end of the scoop and the cutouts on either side of the lid/litter box. With the interior of the scoop basket towards the litter box, slide the scoop down into either opening until it stops and hangs.
Position Modkat Flip: Place the Flip in a quiet, low-traffic area to encourage consistent litter box use.
Wait, don’t toss that empty parts-pack carton! Punch out the perforated holes on the sides and top to turn it into a fun interactive cat toy. Drop in the included ping pong ball and your cat can bat it around inside the carton through the holes for endless play.
Pro Tips
• To help your cat adjust, add a scoop of litter from their old box into Modkat
• Maintain 3–4 inches of litter to allow your cat to sufficiently bury their waste
Using Modkat Flip™ TabFit™ replacement liners
TabFit™ liners are our updated replacement design, engineered for a more secure fit.
They attach directly to the rim and do not use hooks.
Place the liner inside the box with the open entry facing front.
Align the side tabs with the rim slots and press down until they click into place.
Pull the front tab forward and lock it over the front rim lip.
Check all four corners, then add litter.