How do I set it up Modkat XL?

Place your new Modkat XL Litter Box base on a flat surface. Fold the lid open flat and place on the base, align the hinge tabs to the coinciding openings until they drop into place, then slide back into position.

Top-entry set-up

Install the front cover:

  • Hold the cover by the lock at the top.
  • Position the cover inside of the XL base, and sit on the ledge of the front opening.
  • Tilt the cover up into postion until it snaps into place and is flush with the front of XL.

Install liner C: (Indicated on the blue tag)

  • Position the liner in the base.
  • Hang each of the four liner grommets on the corner hooks under the lid frame.

Front-entry set-up

Install liner D: (Indicated on the blue tag)

  • Position the liner in the base with the open side facing front.
  • Hang each of the four liner grommets on the corner hooks under the lid frame.

Install the walk-off platform:

  1. Be sure your reusable liner is in place and secured by the four hooks.
  2. Hold its flat top in the palm of your hand with the Modkat logo down facing your finger tips.
  3. Position it at the bottom of the entrance against the front lip of The Modkat Tray, or Modkat XL.
  4. Tilt up into place, while appling pressure to force it over the lip and the liner until it snaps in place.

 

How-to videos:

Frame Installation

Lid Installation

Frame removal

Front cover installation

Walk-off platform installation